Brick Paver Installation & Edging



Staging of product

Many paver projects will differ depending on gain access to, site conditions, project size and of course, the weather condition. Careful consideration needs to be taken to figure out the time to start the paver installation.

The supervisor or task manager must constantly have the materials (sand/ pavers) distributed around the project site for effective and simple setups. Paver pallets/bundles ought to be put in a manner not to disrupt the paver installation. The correct pallet/bundle placement can make the actual task installation easier and quicker by reducing the general labor of handling the material.

Brick paver patterns

Pavers can be positioned in various patterns depending on their shape. Each paver shape will normally have numerous different hatch patterns that are offered by the manufacturer.

Specialists need to take into consideration the traffic weight loads on their paver jobs. In the majority of applications worldwide, it has actually been shown that pavers laid in a herringbone pattern have actually performed properly.

Pavers that are 60 mm (2 - 3/8 in) density appropriate for pedestrian applications. Pavers that are going to be utilized in commercial or industrial applications ought to be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a variety of conditions that figure out the starting point of a paver job.

When starting to install pavers it is best to snap a real straight chalk line on the surface of the bed linen sand or pull a real straight string line above the surface area of the bedding sand at the completed elevation of the pavers This will assist as a guide for preserving straight joint lines and will also enable the installer to make adjustments in the positioning of the pavers.

Buildings and concrete suppressing are typically not straight and ought to not be utilized for developing straight joint lines. The usage of string lines is necessary to figure out the real straightness of the edge. As the paver installation progresses, the string lines will help reduce the need for small trim pieces.

Joint width in between pavers need to be in between 1/16 and 3/16 in (2 and 5 mm ). There are some pavers with spacer bars on their sides. These will maintain a minimum joint width and allow the bedding and jointing sand to enter between each paver. Pavers with spacer bars are normally not laid in snug versus each other considering that a string line will supply constant joint spacing.

Installation of brick pavers.

One of the most extensively utilized approaches for the installation of pavers is hand installation of each paver. It is best to set up a single row of pavers along one of the real straight lines that you have actually pulled or above the bed linen sand. The finest approach is to place a paver against another one and let it slide down into the bedding sand.

When setting up pavers on a high grade, they need to be set up at the base of the grade going uphill. This will avoid the pavers from sneaking as they are being laid.

The best way for installing pavers on large tasks is to install them mechanically. There are a couple products a specialist must think about prior to setting up pavers mechanically:

1.) Mechanical installers are just capable of installing pavers in certain patterns.

2.) The contractor needs to make certain that the producer is capable of manufacturing and bundling pavers in the desired pattern on the pallets for easy mechanical installation.

3.) Contractors might come across a color mixing circumstance coming off the bundles of pavers Poor color blending might lead to a patchy looking installation. Many manufacturers follow color mixing on each package of pavers, but it is the contractor's responsibility to make sure correct mixing in the field.

Cutting treatments for brick pavers.

Contractors usually have two methods of cutting pavers. When cutting pavers damp, it will help decrease dust and will extend the diamond blades life. The operator of the brick saw should constantly cut the pavers away from the surface of the paver field when cutting wet, due to the reality that the pavers will produce a slurry that will stain the paver surface area.

The brick saw operator must always use the appropriate protection that is required for operating a saw, such as eye, ear, breathing and hand security ).

Edging types

Edge restraints play a significant function in the overall success of an interlocking pavement installation Edging restraints remove lateral movement of the pavers and hold the pavers securely together. Particularly at the outer border of the paver application, without an edging restraint, your project is ensured to fail with time.

There are a number of different edging restraints from which specialists can choose. Typically made edge restraints are the most typically utilized by professionals. Manufactured edging restraints can vary from, plastic edging, steel and aluminum, timbers or precast concrete and stone. An edging type that is utilized primarily in business and industrial applications is poured-in-place concrete curbs. This edging restraint is normally installed by other specialists.

Edging installation.

This might result in the migration of the bedding sand and ultimate lateral motion of the pavers. If there is a possibility of losing bedding sand in between the pavers and the edge restraint, then geo textile material is recommended. When a space in between the pavers and the edging exceeds 3/8" (10mm), then the area needs to be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers need to be compressed. The whole area that is to be compacted need to be swept clean of any foreign items and debris that can cause scuffing or scratching on the surface of the pavers.

It is important to have a compactor that can put in in between 3000lbs. And 5000 lbs. Of centrifugal compaction force. In addition, it is essential that the very first compaction takes place before any jointing sand has actually been applied to the pavers. If jointing sand is applied to the pavers prior to compaction takes place, this can cause a bridging issue and will not permit the joints to be completely filled with jointing sand. This can also prevent the pavers from being appropriately set into the bed linen sand.

When condensing the pavers, it is recommended that you make at least two passes in various directions across the pavers. This will enable the pavers to be effectively embeded in the bedding sand and will force the bedding sand up into the joints from the bottom of the pavers.

The compaction of the pavers is really important to the final performance of the pavers. Failure to do appropriate compaction can lead to contortions and pavement failure with time.


Paver pallets/bundles should be placed in a manner not to interfere with the paver installation. One of the most commonly utilized approaches for the installation of pavers is hand installation of each paver. The operator of the brick saw should always cut the pavers away from the surface of the paver field when cutting wet, due to the truth that the pavers will produce a slurry that will stain the paver surface area. Edging restraints remove lateral motion of the pavers and hold the pavers firmly together. When a gap between the Koi Pond Florida pavers and the edging goes beyond 3/8" (10mm), then the area should be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *